3. Lift the VersaGlide assembly from the front cover assembly.
LCD Panel Switch Board
Remove the LCD panel switch board as follows.
1. Disconnect the LCD panel switch cable from connector CP17 (
LCD panel latch switch board.
2. Remove 2 screws (
A – LCD Cover Panel Switch Board Screws
This completes the disassembly of the front cover assembly. Reverse this
procedure to properly reassemble.
LCD Panel Assembly
Remove the LCD panel assembly as follows.
1. Disconnect cables from the LCD cable at P4 on the main board and the LED
sub-assembly cable at connector P2.
A – Connector CP16
A
) and lift from the front cover assembly.
B – VersaGlide Screws
B – Connector CP17
Disassembly and Reassembly 3-15
B
) on the