Removing The Lcd Panel - NEC Versa M540/PB EasYnote R7 Disassembly Manual

Removing the LCD Panel

To remove the LCD panel, first remove the LCD module (see
then perform the following steps:
1. Use a pin to remove the rubber covers on the LCD module as shown in Fig. 25
2. Unscrew all screws shown in Fig. 25
3. Release the LCD Bezel from the side carefully and put it aside as shown in Fig. 26
NEC Versa M540/PB EasyNote R7 Disassembly Manual
Screws on the LCD Module
Fig. 25
Removing the LCD Bezel
Fig. 26
Removing the LCD Module),
M2.5x7 Black
Page 17