Systemsoft Powerprofiler; Systemsoft Cardwizard; Intellisync 97 Or Intellisync For Notebooks - NEC VERSA LX Service And Reference Manual

To find out more about Intel LANDesk Client Manager capabilities and uses,
refer to the online help that is available when you open Client Manager.
Note:
Client Manager, you may be prompted to install Microsoft's
Internet Explorer. Be sure to install Internet Explorer before
installing LANDesk Client Manager.
After Internet Explorer is installed you must run the
LANDesk Client Manager setup program again.

SystemSoft PowerProfiler

SystemSoft PowerProfiler for Windows NT lets you manage power resources,
balancing performance with battery conservation. You can group power
management settings into "profiles" for best performance and best conservation.
You can also create custom profiles. PowerProfiler provides status information,
alarms, and timers that let you easily monitor and control power consumption.
Access PowerProfiler through the Start, Programs menu.

SystemSoft CardWizard

SystemSoft CardWizard for Windows NT provides limited plug and play
capability by automatically diagnosing and resolving many PC card problems.
When you insert a new PC card into a PC card slot, the Wizard displays a
representation of the slot with information about the new card. If there are
problems, in most cases, the Wizard automatically fixes them. Typical problems
that are resolved include incorrect or missing drivers, system resource conflicts,
unconfigured network and ATA cards, and memory conflicts.
Access CardWizard through the Start, Programs menu.

Intellisync 97 or Intellisync for Notebooks

Intellisync 97 or Intellisync for Notebooks is a powerful PC-to-PC
synchronization solution that enhances your productivity by letting you
synchronize all your key data. With Intellisync 97 or Intellisync for Notebooks
you can:
T
Synchronize files, drives, and directories on two computers, or in
different partitions on a single computer.
T
Synchronize data between two Personal Information Managers (PIMs).
T
Copy and move files on a remote system using an infrared device or a
parallel or serial cable.
T
Control access each remote system has to your data.
Before using Intellisync 97 or Intellisync for Notebooks for infrared transfer,
enable the IR port on your NEC Versa.
2-30 System Configuration and Setup
During the setup and installation of LANDesk