Front Cover - NEC VERSA LX Service And Reference Manual

4. Once the drive is disconnected, use the lever to lift the drive out of the
system. Once removed, only handle the drive by its sides.

Front Cover

The following describes the steps to remove the front cover.
1. The file bay retaining screw (
been removed in a prior step. If not, remove it now.
2. Remove a total of 9 screws.
T
5 from the bottom surface (
T
1 from the VersaBay III (
T
1 from the file bay (
T
2 from the battery bay (
3. Turn the system over and open the LCD panel.
Lifting the drive out of the bay
) on the bottom of the system should have
B
A
)
A
A )
A )
A – Bottom Screws B – File Bay Screw
)
Disassembly and Reassembly 3-13