Removing The Lcd Panel - NEC Versa M340/E2000 Disassembly Manual

Removing the LCD Panel

To remove the LCD panel, first remove the LCD module (see
then perform the following steps:
1. Use a pin to remove the rubber cover on the LCD module as shown in Fig. 23
2. Remove all screws as shown in Fig. 23 and remove carefully the LCD cover.
Fig. 23 Removing the rubber covers & screws on the LCD Module
3. Release the inverter board by remove the screw and disconnect all connectors as shown
in Fig. 24
Fig. 24 Removing the Inverter Board
NEC Versa M340/E2000 Disassembly Manual
Removing the LCD Module),
A = M2x3 Silver
B = M2.5x5 Black
M2x3 Silver
Page 17