Hdprepez Utility; Using Hdprepez In Windows 95 And Windows 98; Using Hdprepez In Windows Nt - NEC VERSA LX Service And Reference Manual

4. Follow the on-screen instructions to process the selected option.
For some of the selected options you are prompted to reboot your system.
5. If necessary, click Exit to close the NEC Customize dialog box.

HDPREPEZ Utility

Using the HDPREPEZ utility automatically configures your NEC Versa's
system's save-to-file (STF) area on the hard disk drive.
Note:
see the HDPREPEZ.TXT file in the C:\NECUTILS\HDPREP
directory.

Using HDPREPEZ in Windows 95 and Windows 98

In Windows 95 and Windows 98, run the HDPREPEZ utility if you increase the
memory capacity in your NEC Versa beyond the factory installed base memory.
Follow these steps to run the HDPREPEZ utility.
1. Power off and restart your NEC Versa.
2. At the statement "Starting Windows 9x," press
3. From the Startup menu, select "Safe Mode Command Prompt Only," usually
Option 6.
4. Enter MS-DOS. At the c: prompt, type
to change to the \necutils\hdprep directory.
5. Type
HDPREPEZ
NEC Versa for the newly installed memory.
6. Power off your system and then power on. A file, large enough to
accommodate your system's memory is created on the hard disk drive.

Using HDPREPEZ in Windows NT

In Windows NT, run the HDPREPEZ utility if you increase the memory
capacity in your NEC Versa beyond the factory installed base memory.
Follow these steps to run the HDPREPEZ utility.
1. Close all background applications before running the HDPREPEZ utility.
2. Go to Start, Programs, AMI Save to File.
3. Select Create STF File.
A DOS box displays and advises you to close all background applications.
The message also indicates that your system reboots when the process is
complete. Finally, the message prompts you to "Proceed Y/N?"
2-26 System Configuration and Setup
For more details about the HDPREPEZ utility,
and press Enter . The utility automatically prepares your
F8 .
and press
cd \necutils\hdprep Enter