Elgar SW 5550AE Operation Manual page 62

Operation
3.3.7.2 COMM Sub-Menu
The SYSTEM COMM (Communications) sub-menu allows you to:
Configure the GPIB address and display remote status.
•
Display firmware version information.
•
SYSTEM
USER
COMM
EXTERNAL
FAULTS
CONFIG
The DWSB and IWGB fields indicate the internal communication status of the Digital
Waveform Synthesis board and Interharmonic Waveform Generator board. These
should always indicate ON-LINE unless a failure has occurred.
COMM Sub-Menu Status and Information Data:
Menu Item
GPIB ADDR
ECDI VER X.XX
DWSB VER X.XX
IWG VER X.XX
BAUD RATE
DWSB
IWGB
3-24
GPIB ADDR
ECDI VER
DWSB VER
IWG VER
BAUD RATE
DWSB
IWGB
Status and Information Line
[select gpib address]
[installed firmware version]
[RS-232 Baud Rate]
[Digital waveform status]
[Interharmonic Wfrm Gen stat]
SW 5550AE • SW 3700AE • SW 1850AE
OUTPUT [OFF]
25
X.XX
X.XX
X.XX
57600
ON-LINE
ON-LINE
Range/Default Value
Range 1–30
Default 25
—
Range 300–57600
Range 1200–57600
Default 57600
On-Line/Off-Line
On-Line/Off-Line
Operation Manual