1.11 Options - Elgar SW 5550AE Operation Manual

General Description
•
External Amplitude Modulation
0 to 5 VRMS provides 0 to ≥20% output amplitude modulation
(±2% of full scale output).
•
External Direct Input
Normal Amplifier, 0 to 5 VRMS (DC to 500 Hz) or ±5 VDC input for zero to full
scale programmed voltage output (±2% of full scale output).
•
External Gain Control
0 to ±7.07 VDC provides zero to full scale programmed voltage output
(±2% of full scale output).
•
External Input Impedance
≥30 kΩ.
•
System Firmware
System firmware is stored in flash memory. This makes it possible to upgrade
the firmware without disassembling or returning the unit.

1.11 Options

•
Parallelable For Additional Power above 5550A VA
•
External Waveform Creation Software
•
Input Power Factor Correction to 0.99
•
Interharmonics Waveform Generator
•
5V and 26V, 26VA Auxiliary AC outputs for 115V input, 350-450 Hz.
1-8
SW 5550AE • SW 3700AE • SW 1850AE
Operation Manual