Operation
Use the Enter and Menu keys or the Right/Left Arrow keys to move between
•
the menus.
Use the Up/Down Arrow keys to cycle through the items within a specific menu.
•
When you select an item, you can enter data in two ways: (1) Use the keypad to
•
type in the data, or (2) press the Enter key to place a box around the value area,
then use the Up/Down Arrow keys or the Knob to select the data to be entered.
Press the Enter key to accept the data.
•
3.3.1
MAIN MENU
The MAIN MENU consists of the sub-menus listed below.
MAIN MENU
PROGRAM
MEASURE
WAVEFORM
SEQUENCE
INSTR
SYSTEM
MAIN MENU Status and Information Data:
Menu Item
PROGRAM
MEASURE
WAVEFORM
SEQUENCE
INSTR
SYSTEM
3-4
Status and Information Line
[interactive programming]
[measurement system]
[create/edit waveform]
[create/edit sequences]
[instrument configuration]
[system configuration]
SW 5550AE • SW 3700AE • SW 1850AE
OUTPUT [OFF]
Operation Manual