Elgar SW 5550AE Operation Manual page 51

SW 5550AE • SW 3700AE • SW 1850AE
3.3.4.5 DELETE Sub-Menu
The WAVEFORM menu allows you to DELETE a waveform stored in non-volatile
memory.
ALL USER WAVEFORMS - Erases the 50 user waveform locations in non-volatile
RAM. Any user waveforms currently running will not be deleted.
INITIALIZE MEMORY - Resets the waveform library to the factory settings. All factory
waveforms will be restored and all user waveforms stored in non-volatile RAM will be
erased. You must cycle power to the unit after this function for the changes to take
effect.
NOTE: Under normal operating conditions this function is not required.
Instead, use "Delete–All User Waveforms."
WAVEFORM
LOAD
EDIT
VIEW
SAVE
DELETE
Press
toggle custom waveforms
DELETE Sub-Menu Status and Information Data:
Menu Item
FUNC
ALL USER WAVEFORMS
INITIALIZE MEMORY
NOTE: If you attempt to delete a waveform in Flash Memory,
the message "! - STANDARD WAVEFORM" will appear.
Operation Manual
FUNC
ALL USER WAVEFORMS
INITIALIZE MEMORY
key to
Right Arrow
Status and Information Line
[<enter> to select waveform]
[<enter> for all user waveforms]
[Resets to factory defaults]
OUTPUT [OFF]
Name
Operation
3-13