Operation
3.3.4.4
SAVE Sub-Menu
The WAVEFORM menu allows you to assign a name to a new waveform and SAVE it
from the scratchpad to non-volatile memory.
1.
Use the Up/Down Arrow keys or the Knob to enter the custom waveform name.
Press the Right Arrow key to proceed to the next character; press the Left
Arrow key to backspace. The last character must be "–".
2.
Press the Enter key.
3.
Go to SAVE or SAVE RMS and press the Enter key to save.
WAVEFORM
LOAD
EDIT
VIEW
SAVE
DELETE
SAVE Sub-Menu Status and Information Data:
Menu Item
NAME
SAVE
SAVE RMS
3-12
NAME
SAVE
SAVE RMS
Status and Information Line
[– > = next char, < – = backsp]
[save waveform to library]
The waveform is scaled to maintain the RMS value
of the waveform fundamental.
[save waveform to library]
The waveform is scaled so that the entire waveform
conforms to the Vrms value of the WAVEFORM EDIT
menu Vrms field.
SW 5550AE • SW 3700AE • SW 1850AE
OUTPUT [OFF]
–
Operation Manual