Section 2 Installation; Introduction; Unpacking - Elgar SW 5550AE Operation Manual

2.1

Introduction

The Elgar Model SW 5550AE, SW 3700AE, or SW 1850AE has been fully calibrated
and tested prior to shipment. The instrument is ready for immediate use upon receipt.
WARNING! The SmartWave unit weighs 73–126.5 lbs. (33.1–57.2 kg),
depending on the model. A minimum two–person lift is required!
WARNING! Hazardous voltages are present when operating this
equipment. Please read the Safety Notice at the beginning of this
manual prior to installation, operation, or maintenance.
2.2

Unpacking

Perform a visual inspection of the shipping container prior to accepting the package
from the carrier. If extensive damage to the shipping container is evident, a description
of the damage should be noted on the carrier's receipt and signed by the driver of the
carrier agent.
If damage is not apparent until the instrument is unpacked, a claim for concealed
damage should be placed with the carrier. In addition, the shipping container(s) and
filler material should be saved for inspection. Forward a report of damage to the Elgar
Service Department. Elgar will provide instructions for repair or replacement of the
instrument.
If the instrument needs to be returned to Elgar, suitable shipping containers and packing
materials must be used. If proper packing material is not available, contact Elgar to
provide containers and shipping instructions.
Operation Manual
SECTION 2
INSTALLATION
2-1