What You See and Hear
The model 8662 has many audio and visual signals to indicate feature activity. The
following are a few helpful tips:
•
Feature lamps may be unlit (
to indicate call or feature activity.
•
A red lamp indicates that a call is ringing, holding, or active on your endpoint.
•
All feature lamps illuminate at the same time for a few seconds when the end-
point is resetting or powering on (see
•
The following errors may cause an error tone:
— Pressing an invalid button combination
— Trying to select a restricted feature
— Dialing a restricted or invalid number
— Dialing too slowly between digits
— Waiting too long before performing the next step
To correct, hang up and try again.
•
Many features "time-out" if you wait too long before performing the next step. If
this happens, you must start over.
•
"Off-hook" means the handset is lifted—"on-hook" means the handset is in the
cradle.
•
The Message Indicator lamp flashes when there are waiting mes-
sages and duplicates the
Endpoint Connectors
The Model 8662 endpoint connectors include:
•
Handset jack: Connects to a handset.
•
Headset jack: Connects to a headset.
•
Personal computer (PC) port: Connects
to a PC or another 10/100 Ethernet device.
•
LAN/Power jack: Connects to a power
supply.
Contact your network administrator for more
information about the endpoint connectors and
supported ethernet devices.
6
), lit (
LINE
LINE
page
10).
button signals.
MESSAGE
Headset Jack
Inter-Tel
), or flashing (
LINE
Handset Jac
PC Port
LAN/Power Jack
®
Model 8662 Endpoint User Guide
)
k