Endpoint Setup; Adjusting The Viewing Angle; Adjusting The Lcd Contrast Level - Inter-Tel 7000 8662 User Manual

E S
NDPOINT ETUP
Your endpoint should be ready to use. If either of the following messages is displayed,
ENTER ACTIVATION
contact your system administrator for assistance or refer to the Activation and Wel-
come e-mail messages (as shown in Microsoft
information to activate your endpoint and enable Inter-Tel Personal Communicator for
your account.

Adjusting the Viewing Angle

You can adjust the endpoint viewing angle according to your preference.
To adjust the viewing angle:
Position the endpoint on a flat surface.
1.
Remove the support "feet" from the base holes.
2.
Tilt the endpoint to the desired angle.
3.
Replace the feet in the holes to secure the position.
4.

Adjusting the LCD Contrast Level

You can adjust the LCD contrast according to your preference.
To adjust the LCD contrast:
Press
1.
Press
2.
setting.
8
CODE
.
3 9
or to adjust the contrast. Press the center of the button to save the
ENTER CONFIG
URL
® ®
Outlook below), which contain
®
Inter-Tel Model 8662 Endpoint User Guide