Factory Default Settings - Waters Network Systems MS1008-2G-4POE Operating Manual

Enable State – PoE is enabled by default. You can check this box to disable the
PoE function to the port.
Power Limit From – Choose the power limit method.
Classification:
o
in accordance with the related class.
o Management: You can assign the power limit manually.
Legacy – Used to support legacy power devices.
Priority – Used to choose the priority of power supply.
Power Limit (<15400) mW - While Power Limit From is in Management mode, you
can enter the power limit value (under 15.4 Watts).
Mode - Displays the operating mode of the port.
Current (mA) - Displays the operating current of the port.
Voltage (V) - Displays the operating voltage of the port.
Power (mW) - Displays the power consumption of the port.
Determined Class – Displays the power limit class.
Click Apply to apply changes.
5.31

Factory Default Settings

You can return the factory default settings by choosing Factory Default from the Main
Menu.
Waters Network Systems
The system will limit the power supply to the powered device
Figure 5.44 – PoE Settings
MS1008-2G-4POE/PSX1008-2G-4PoE User's Manual Page 71