Power Over Ethernet (Poe) - Waters Network Systems MS1008-2G-4POE Operating Manual

5.30

Power over Ethernet (PoE)

The following list describes the PoE settings for the switch.
Maximum Power Available - Displays the maximum watts.
Actual Power Consumption – Real-time total power consumption.
Power Source – Displays the supplying power source.
Power Source 1 (AC) – Displays the supplying power of power source 1.
Power Source 2 (AC+DC) – Displays the supplying power of power source 2 (may
vary by model.)
Firmware Version – Displays the firmware version.
AC Disconnect - Use this setting to disable AC input.
Capacitive Detection - Used to detect the power consumption of the powered
device.
Click Apply to confirm/save changes.
Use the Refresh button to renew the states.
Port – Displays the index of PoE ports.
Waters Network Systems
Figure 5.43 – All MAC Address Interface
MS1008-2G-4POE/PSX1008-2G-4PoE User's Manual Page 70