General Troubleshooting - Intel NetportExpress PRO User Manual

C H A P T E R 4
The selected memory is a ROM address
The MEMORY keyword was used to force a particular memory address,
but the resource checking in the driver reported a failure. To override the
resource checking and load the driver anyway, use the NOCHECK
keyword.
The selected memory is a RAM address
The MEMORY keyword was used to force a particular memory address,
but the resource checking in the driver reported a failure. To override the
resource checking and load the driver anyway, use the NOCHECK
keyword.
The TXBUFFERSIZE keyword must be between 1 and 10
The value of the TXBUFFERSIZE keyword specifies the number of
packets used in the transmit buffer. Each packet requires approximately
1520 bytes of host memory.

General Troubleshooting

If any of the following situations occurs after you have completed the
installation procedure, review the accompanying information before calling
Customer Support.
98