Table of Contents
Advertisement
Ungermann-Bass Net/One for DOS
NDIS 2.0 Driver
The PRO/100 CardBus adapter is supported on Ungermann-Bass Net/One
LAN Manager and MS-NET networks. There are two NDIS driver
packages available from UB: XNS BNS/NDIS and TCP BNS/NDIS. These
packages, used with a Intel NDIS driver, provide files that support DOS
workstations. They are available from UB and authorized UB
representatives.
Ungermann-Bass Net/One LAN Manager version 2.1
Installation
1
Begin installation of LAN Manager 2.1 using "setup."
2
When prompted to select the available network adapter driver, choose
"Other Driver."
3
When prompted, insert the Intel Network Drivers Disk.
4
Select "Intel EtherExpress PRO/100 Mobile CardBus 32" from the
menu.
5
Continue with the installation until it is completed.
6
Following the UB instructions, modify your CONFIG.SYS file by
adding the following lines:
For DOS:
DEVICE = [ PATH ]M32ANDIS.EXE
where [path] is the drive and directory in which you installed your
network operating system.
7
Use a text editor to modify your PROTOCOL.INI file as follows:
•
For each protocol that you want to bind, set the protocol
definition area of the PROTOCOL.INI file to:
BINDINGS = UBLOOP
Software Installation
51
Advertisement
Table of Contents
Troubleshooting
