Packet Driver Settings; M32Apd.com) - Intel NetportExpress PRO User Manual

Packet Driver Settings (for driver

M32APD.COM)

Packet driver parameters must be stated on the M32APD.COM command
line when running the packet driver.
Packet Driver Configuration Notes
The Intel packet driver M32APD.COM conforms to FTP Software's public
domain packet-driver specification. It is a DOS-based terminate-and-stay-
resident (TSR) program. The driver file M32APD.COM is located in the
\PKTDRV directory on the Network Drivers Disk.
Refer to your network documentation for instructions on how to install the
packet driver with your network. Most installations should be able to use
the default settings listed below.
Keywords are not case sensitive, and can be abbreviated to a unique
sequence of initial characters (for example, IN for INTERRUPT).
Packet Driver Keywords
Keyword
MEMORY
IOADDRESS
IRQ
SOCKET
MODE
NOCHECK
NOLED
TXBUFFERSIZE
RXBUFFERSIZE
ERT
NOEARLYRX
NOEARLYTX
LINESPEED
LINEMODE
Default
AUTO
AUTO
AUTO
AUTO
MEM
NOT PRESENT
NOT PRESENT
2
15
HIGH
NOT PRESENT
NOT PRESENT
AUTO
HALF
Configuration Reference
Valid Values
C000 - EF00
100 - FF80
3 - 15
1 - 4
IO OR MEM
1 - 10
1 - 30
LOW, MEDIUM, OR HIGH
10 OR 100
HALF OR FULL
81