Troubleshooting; Problems During Initial Installation; Problems During Client Installation - Intel Internet Station User Manual

Troubleshooting

Troubleshooting gives you solutions to problems that may occur during installa-
tion and operation of the Internet Station.

Problems during initial installation

No power to the Internet Station
•
•
•
PC Card LED blinks continuously
•
PC Card LED does not light
•
•
•
•
•

Problems during client installation

I cannot browse to the Internet Station
•
•
•
•
Verify that the power cable is firmly connected.
Make sure the outlet is working by connecting a known
working device.
Press the Power button on the front panel.
Turn off the power and then turn it back on.
Verify that the PC Card modem seats firmly in the slot.
Make sure that it is not inserted diagonally, upside down, etc.
Press the Power button off and on to detect a new PC card.
Try the other PC card slot in the Internet Station.
Try another PC card.
Verify that the correct address shows in your browser location
field:
istation
or
192.168.42.254
Check the LAN light on the Internet Station. If it does not light,
check the network cable connections at the Internet Station and
the hub. If it is connected, but the LAN light still isn't lit, try a
new cable.
Press the Power button off and on.
Check the TCP/IP setup on your PC.
On Windows* 95:
Run winipcfg from Run on the Start menu. The PC should have
an IP address of 192.168.42.n, where n is from 1 to 127. If the
®
Intel InBusiness™ Internet Station
21