Diagnostic Test Utility Settings (M32Atest.exe) - Intel NetportExpress PRO User Manual

C H A P T E R 3
LINKDISABLE
NOBURST
LATENCY
CACHE
NOWRITEPOST
NOPREFETCH
SINT
VERBOSE
Packet Driver Example
A typical sequence for loading the packet driver M32APD.COM and
default configuration settings is as follows:
M32APD
ETHDRV
If no default configuration settings are used, these must be stated on the
M32APD.COM command line. For example,
M32APD IOADDRESS=320 INT=7
ETHDRV

Diagnostic Test Utility Settings (M32ATEST.EXE)

The M32ATEST.EXE utility is a Intel utility for testing Intel adapter
hardware. It is an MS-DOS executable file.
M32ATEST.EXE tests the adapter hardware functionality, including the PC
Card interface, the serial EEPROM, the Ethernet controller, and the PHY
interface (adapter modules). It displays manufacturing information
including serial number and date and time of manufacture. It also displays
configuration information including interrupt, I/O address, and starting
memory location used.
M32ATEST.EXE is an interactive program. It does not take command line
parameters. Parameters can be modified and tested through the user
interface in the program. See the Troubleshooting section for more
information about this utility.
82
NOT PRESENT
NOT PRESENT
32
32
NOT PRESENT
NOT PRESENT
60
NOT PRESENT
0 - 255
0, 4, 8, 16, OR 32
(60 - 80)