Table of Contents
Advertisement
C H A P T E R 3
The network node address can be modified by manually editing the registry
and adding the parameter 'NetworkAddress' with a hexadecimal string
value, such as '00A0C9112233'. If the user does NOT specify a
'NetworkAddress' then the M32A.SYS driver uses the network node
address contained in the PRO/100 CardBus adapter Card Information
Structure.
Windows 95 Support
The M32A.SYS driver also supports the networking environment in
Microsoft Windows 95.
The files necessary for using M32A.SYS with Windows 95 include:
NETM32A.INF
M32A.SYS
There are user-configurable parameters to the M32A.SYS driver which can
be modified using the Network Control Panel built into Windows 95. This
applet queries the user for parameter selections and then sets the
corresponding parameters in the registry. The user-configurable parameters
are as follows:
Parameter
Value
DIRECTENABLE
EARLYTRANSMIT
LINESPEED
LINEMODE
INTERRUPTSYTLE
78
Intel installation file for Windows 95
Intel NDIS 3 driver for Windows 95
Default Valid
AUTODETECT
ON
AUTO
0
0
Values
OFF, ON,
AUTODETCT
OFF
ON
AUTO DETECT 0
10 MBPS
100 MBPS
AUTODETCT
HALF-DUPLEX 1
FULL-DUPLEX 2
AUTODETECT
PCI-IRQ
ISA-IRQ
Registry
0
0
1
1
2
0
0
1
2
Advertisement
Table of Contents
Troubleshooting
