Table of Contents
Advertisement
C H A P T E R 2
FTP Software LANWatch NDIS 2.0 Driver Installation
1
Run the Intel Installation Program from the Installation Disk.
2
Choose FTP LANWatch from the Select Network Operating System
screen.
3
Follow the prompts to complete the Intel segment of the installation.
4
Install LANWatch according to the instructions in your FTP
LANWatch manual.
5
Using a text editor, add the following lines to your CONFIG.SYS file:
(Include the following line for LANWatch versions earlier than 3.0
only)DEVICE = C:\LW\IFCUST.SYS
6
Create a directory called NDIS on your hard disk, by typing:
7
At the DOS prompt, copy M32ANDIS.EXE from the
C:\INTEL\M32A directory on your hard disk and the file
PROTOCOL.FTP from the \NDIS directory on the Intel Network
Drivers Disk to the \NDIS directory you created in Step 6.
8
Use a text editor to modify the PROTOCOL.FTP file to match the
keywords and values in the sample PROTOCOL.INI file in the
\INTEL\M32A directory.
9
Copy all the files from the \NDIS directory on the FTP Unsupported
Software Disk A to the \NDIS directory created in Step 6.
10 Reboot the PC.
11 Change to the \NDIS directory and run NETBIND.EXE.
12 Run LW.EXE.
32
DEVICE = C:\NDIS\PROTMAN.SYS /I:C:\NDIS
DEVICE = C:\NDIS\M32ANDIS.EXE
DEVICE = C:\NDIS\DIS_PKT.GUP
MD NDIS
Advertisement
Table of Contents
Troubleshooting
