Ibm Local Area Network Support Program - Intel NetportExpress PRO User Manual

C H A P T E R 2

IBM Local Area Network Support Program

IBM Local Area Network Support Program (version
1.36)
NDIS 2.0 Driver
1 Run the Intel Installation Program from the Installation Disk.
2 Choose IBM LAN Support Program from the Select Network
Operating System screen.
3 Follow the prompts to complete the Intel segment of the installation.
4 Install the IBM Local Area Network Support Program according to
the instructions in the IBM Local Area Network Support Program
User's Guide.
5 Under Environment Information, respond "no" to the question "Do
you have adapter option disks?"
6 Choose the Intel CardBus adapter from the list provided.
7 If prompted to do so, insert the Intel Network Drivers Disk when
prompted and type the path
A:\NDIS
8 Press Esc twice to bypass error messages.
9 Continue with the installation until finished.
10 Use a text editor to add the following two lines in your CONFIG.SYS
file at the location indicated by the "rem" statement concerning
insertion of the driver name:
DEVICE=\LSP\M32ANDIS.EXE
11 Copy M32ANDIS.EXE from the directory C:\INTEL\M32A to the
C:\LSP directory on your hard disk.
12 Use a text editor to edit the PROTOCOL.INI keyword settings in the
C:\LSP directory to match the keywords contained in the sample
PROTOCOL.INI file located at C:\INTEL\M32A as required (unless
you are using PRO/100 CardBus adapter default settings).
13 Save the files and reboot the PC.
38