Intel NetportExpress PRO User Manual page 109

5
6
7
8
9
10
11
12
13
14
15
The driver loaded successfully, but I can't get on the network
A Check all connections and verify that the cable drop is good (try a
cable that is known to work on another workstation).
B Reboot by powering down the machine (cold boot). On some
machines the PC Card controller chipset is not properly reset on a
warm boot, and this can cause network errors.
C In a NetWare environment, verify that the frame type running on
your network server is the same as the FRAME type listed first in
the NET.CFG. If you are not sure what the correct Ethernet frame
type is, check with your system administrator. On a multi-server
network, add a preferred server statement to the NET.CFG.
D There could be an interrupt conflict. Try loading the driver with a
different interrupt specified in the PRO/100 CardBus adapter
configuration file. (This may also require some re-configuration
of Card and Socket Services, if they're being used.)
CC000
D2000
CC000
D2000
CC000
D2000
CC000
D2000
CC000
D2000
D2000
Troubleshooting
11 320
15 320
15 320
5 340
5 340
10 340
10 340
11 340
11 340
15 340
15 340
103