Sunsoft Pc-Nfs (Version 3.5) - Intel NetportExpress PRO User Manual

C H A P T E R 2

SunSoft PC-NFS (version 3.5)

NDIS 2.0 Driver
1 Run the Intel Installation Program from the Installation Disk.
2 Choose SunSoft PC-NFS from the Select Network Operating System
screen.
3 Follow the prompts to complete the Intel segment of the installation.
4 Install PC-NFS for Ethernet according to instructions in the PC-NFS
documentation. Choose NDIS setup, and follow the instructions to
complete the setup. Note the prompt that tells you that further manual
modifications will have to be made.
5 Reboot the computer. You will see some error messages. Disregard
them and continue with these instructions.
6 Rename the file PROTOCOL.NFS in the C:\LANMAN directory to
PROTOCOL.INI. Use a text editor to edit the PROTOCOL.INI file as
follows:
Replace the items
[YOUR-MAC-MODULE]
DRIVERNAME = YOURMAC$
OPTION1 = VALUE1 ETC.
[NFS-NDIS]
DRIVERNAME = NFSLINK1
BINDINGS = YOUR-MAC-MODULE
with
[INTELNET]
DRIVERNAME = INTEL$
[NFS-NDIS]
DRIVERNAME = NFSLINK$
BINDINGS = INTELNET
7 Copy M32ANDIS.EXE from the C:\INTEL\M32A directory to the
C:\LANMAN directory.
8 Use a text editor to insert the following lines in your CONFIG.SYS
file:
DEVICE=C:\LANMAN\M32ANDIS.EXE
between the two lines
DEVICE=C:\LANMAN\PROTMAN.SYS
48