Intel NetportExpress PRO User Manual page 51

15 In the Network Setup dialog box, choose Drivers.
16 In the Network Drivers dialog box, choose Add Adapter.
17 In the Add Network Adapter box, choose Unlisted or Updated
Network Adapter and click OK.
18 When prompted for an "unlisted, updated, or vendor-provided
network driver disk," insert the Intel Network Drivers Disk and click
OK.
19 Select "Intel EtherExpress PRO/100 Mobile CardBus 32" and click
OK.
20 Close the Network Drivers dialog box and click OK in the Network
Setup box.
21 Complete the installation process, inserting the Intel Network Drivers
Disk if required.
22 Reboot the computer.
NOTE:
Verify that the following lines have been added to your AUTOEXEC.BAT and
STARTNET.BAT files. If they are not there, add them manually using a text edi-
tor.
Add the following command to the AUTOEXEC.BAT file, where \WINDOWS is the
directory into which Windows was installed:
C:\WINDOWS\NET START
Add the following command to the STARTNET.BAT file in your NWCLIENT direc-
tory, where \WINDOWS is the directory into which Windows was installed:
C:\WINDOWS\ODIHLP.EXE
Windows for Workgroups 3.11 Using the NDIS 2.0
Driver
1 Run the Intel Installation Program from Disk 1, Installation Disk.
2 Choose Windows for Workgroups installation from the Select
Network Operating System screen.
3 Choose "No" on the Attached to Network File Server screen.
4 Follow the prompts to complete the Intel segment of the installation.
5 Start Windows for Workgroups and double-click on the Network
Setup icon in the Network Group.
Software Installation
45