Table of Contents
Advertisement
• In the section PCTCP ifcust 0 change the line
to read
10 Save the file and exit the text editor.
11 Change to the C:\ (root) directory.
12 Use a text editor to modify the AUTOEXEC.BAT file as follows
(\PCTCP is the default installation directory):
•
Move the line containing the STARTNET.BAT command or the
lines containing the network driver files to immediately above the
line
•
Add the line
after the line
13 Save the file and exit the text editor.
14 Copy the file ODIPKT from disk 5 of the FTP PC/TCP installation
disks to the directory into which PC/TCP was installed.
15 Reboot the PC.
FTP Software PC/TCP Packet Driver Installation with
OnNet 1.1
1
Run the Intel Installation Program from the Installation Disk.
2
Choose FTP PC/TCP from the Select Network Operating System
screen.
3
Follow the prompts to complete the Intel segment of the installation.
4
Exit to DOS, switch to the C:\INTEL\M32A directory and run
M32APD.COM.
5
Install PC/TCP software according to the directions given in the PC/
TCP documentation.
6
Copy the file M32APD.COM from the C:\INTEL\M32A directory to
the PC/TCP directory specified in the PC/TCP install procedure.
INTERFACE-TYPE=NDIS
INTERFACE-TYPE=PKTDRV.
SET PCTCP=C:\PCTCP\PCTCP.INI
C:\PCTCP\ODIPKT
PCTCP=C:\PCTCP\PCTCP.INI
Software Installation
35
Advertisement
Table of Contents
Troubleshooting
