Table of Contents
Advertisement
13 Close the Network Drivers dialog box and click OK in the Network
Setup box.
14 Complete the installation process, inserting the Intel Network Drivers
Disk if required.
15 Continue with the installation until it is completed.
16 Click on the Control Panel in the "Main" group.
17 Select Startup from the Control Panel.
18 In the Options for Enterprise Networking window click "Log on to
Windows NT or LAN Manager Domain."
19 Save, exit, and reboot the PC.
Windows for Workgroups
NDIS 2.01 and ODI Drivers
Instructions are provided for installing Intel network drivers for the first
time on a system using Windows for Workgroups version 3.11 alone or
with NetWare. These instructions assume that Windows for Workgroups
has already been installed. Remove any earlier version of the Intel drivers
before installing the new version. No NDIS 3 driver is supplied for
Windows for Workgroups.
The following topics are covered for Windows for Workgroups:
•
How to install for Windows for Workgroups version 3.11 and
NetWare using the ODI driver
•
How to install for Windows for Workgroups 3.11 using the NDIS 2.0
driver
•
How to Disable Windows for Workgroups Networking
For troubleshooting tips for Windows for Workgroups, see Chapter 4,
Troubleshooting.
Software Installation
43
Advertisement
Table of Contents
Troubleshooting
