Cisco Catalyst 2950 Command Reference Manual page 173

Chapter 2 Cisco IOS Commands
Table 2-6
Field
RX EAPOL
RX EAPOL Logoff
RX EAPOL Invalid
RX EAPOL Total
RX EAP
RX EAP Resp/Oth
RX EAP LenError
Last EAPOLVer
LAST EAPOLSrc
TX EAPOL Total
TX EAP Req/Id
TX EAP Req/Oth
1. EAPOL = Extensible Authentication Protocol over LAN
2. EAP = Extensible Authentication Protocol
Related Commands Command
dot1x default
78-11381-05
show dot1x statistics Field Descriptions
Description
1
Start Number of valid EAPOL-start frames that have been received
Number of EAPOL-logoff frames that have been received
Number of EAPOL frames that have been received and have an
unrecognized frame type
Number of valid EAPOL frames of any type that have been received
2
Resp/ID Number of EAP-response/identity frames that have been received
Number of valid EAP-response frames (other than response/identity
frames) that have been received
Number of EAPOL frames that have been received in which the packet
body length field is invalid
Protocol version number carried in the most recently received EAPOL
frame
Source MAC address carried in the most recently received EAPOL frame
Number of EAPOL frames of any type that have been sent
Number of EAP-request/identity frames that have been sent
Number of EAP-request frames (other than request/identity frames) that
have been sent
Description
Resets the global 802.1X parameters to their default values.
Catalyst 2950 Desktop Switch Command Reference
show dot1x
2-149