Show Etherchannel - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Cisco IOS Commands

show etherchannel

Use the show etherchannel user EXEC command to display EtherChannel information for a channel.
Syntax Description
channel-group-number
brief
detail
load-balance
port
port-channel
summary
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.1(6)EA2
Usage Guidelines If you do not specify a channel-group, all channel groups appear.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
78-11381-05
show etherchannel [channel-group-number] {brief | detail | load-balance | port | port-channel |
summary} [ | {begin | exclude | include} expression]
(Optional) Number of the channel group. Valid numbers range from 1 to 6.
Display a summary of EtherChannel information.
Display detailed EtherChannel information.
Display the load-balance or frame-distribution scheme among ports in the
port channel.
Display EtherChannel port information.
Display port-channel information.
Display a one-line summary per channel-group.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced. It replaced the show port group
command.
Catalyst 2950 Desktop Switch Command Reference
show etherchannel
2-153