Cisco Catalyst 2950 Command Reference Manual page 137

Chapter 2 Cisco IOS Commands
Examples
This example shows how to set the learning method to aggregation-port (the default):
Switch(config-if)# pagp learn-method aggregation-port
You can verify your settings by entering the show running-config or show pagp channel-group-number
internal privileged EXEC command.
Related Commands Command
channel-group
pagp port-priority
show pagp
show running-config
78-11381-05
Description
Assigns an Ethernet interface to an EtherChannel group.
Selects an interface through which all Port Aggregation Protocol (PAgP)
traffic through the EtherChannel is sent.
Displays PAgP channel-group information.
Displays the configuration information running on the switch. For syntax
information, select Cisco IOS Configuration Fundamentals Command
Reference for Release 12.1 > Cisco IOS File Management Commands >
Configuration File Commands.
Catalyst 2950 Desktop Switch Command Reference
pagp learn-method
2-113