Snmp-Server Enable Traps - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Cisco IOS Commands

snmp-server enable traps

Use the snmp-server enable traps global configuration command to enable the switch to send Simple
Network Management Protocol (SNMP) notification for various trap types to the network management
system (NMS). Use the no form of this command to return to the default setting.
Note Though visible in the command-line help strings, the snmp-server enable informs command is not
supported. To enable sending SNMP inform notifications, use the snmp-server enable traps command
combined with the snmp-server host host-addr informs command.
Syntax Description c2900
cluster
config
entity
hsrp
mac-notification
rtr
snmp
syslog
vlan-membership
vtp
Defaults The sending of SNMP traps is disabled.
Command Modes Global configuration
Command History Release
12.1(6)EA2
12.1(9)EA1
78-11381-05
snmp-server enable traps [c2900 | cluster | config | entity | hsrp | mac-notification | rtr | snmp |
syslog | vlan-membership | vtp]
no snmp-server enable traps [c2900 | cluster | config | entity | hsrp | mac-notification | rtr | snmp
| syslog | vlan-membership | vtp]
(Optional) Enable SNMP configuration traps.
(Optional) Enable cluster traps.
(Optional) Enable SNMP configuration traps.
(Optional) Enable SNMP entity traps.
(Optional) Enable Hot Standby Router Protocol (HSRP) traps.
(Optional) Enable MAC address notification traps.
(Optional) Enable SNMP Response Time Reporter traps.
(Optional) Enable SNMP traps.
(Optional) Enable SNMP syslog traps.
(Optional) Enable SNMP VLAN membership traps.
(Optional) Enable VLAN Trunking Protocol (VTP) traps.
Modification
This command was first introduced.
The vlan-membership keyword was added.
Catalyst 2950 Desktop Switch Command Reference
snmp-server enable traps
2-235