Snmp-Server Host - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Cisco IOS Commands

snmp-server host

Use the snmp-server host global configuration command to specify the recipient (host) of a Simple
Network Management Protocol (SNMP) notification operation. Use the no form of this command to
remove the specified host.
Syntax Description host-addr
informs | traps
version 1 | 2c | 3
community-string
c2900
cluster
config
entity
hsrp
mac-notification
rtr
snmp
tty
udp-port
vlan-membership
vtp
78-11381-05
snmp-server host host-addr [informs | traps] [version {1 | 2c | 3 [auth | noauth]}]
community-string [c2900 | cluster | config | entity | hsrp | mac-notification | rtr | snmp | tty |
udp-port | vlan-membership | vtp]
no snmp-server host host-addr [informs | traps] [version {1 | 2c | 3 [auth | noauth]}]
community-string [c2900 | cluster | config | entity | hsrp | mac-notification | rtr | snmp | tty |
udp-port | vlan-membership | vtp]
Name or Internet address of the host (the targeted recipient).
(Optional) Send SNMP traps or informs to this host.
(Optional ) Version of SNMP used to send the traps.
These keywords are supported:
1—SNMPv1. This option is not available with informs.
2c—SNMPv2C.
3—SNMPv3. These optional keywords can follow the version 3 keyword:
•
•
Password-like community string sent with the notification operation.
Though you can set this string by using the snmp-server host command,
we recommend that you define this string by using the snmp-server
community global configuration command before using the snmp-server
host command.
(Optional) Send SNMP switch traps.
(Optional) Send cluster member status traps.
(Optional) Send SNMP configuration traps.
(Optional) Send SNMP entity traps.
(Optional) Send Hot Standby Router Protocol (HSRP) traps.
(Optional) Send MAC notification traps.
(Optional) Send SNMP Response Time Reporter traps.
(Optional) Send SNMP-type traps.
(Optional) Send Transmission Control Protocol (TCP) connection traps.
(Optional) Send notification host's User Datagram Protocol (UDP) port
number.
(Optional) Send SNMP VLAN membership traps.
(Optional) Send VLAN Trunking Protocol (VTP) traps.
auth (Optional). Enables Message Digest 5 (MD5) and Secure Hash
Algorithm (SHA) packet authentication.
noauth (Default). The noAuthNoPriv security level. This is the
default if the [auth | noauth] keyword choice is not specified.
Catalyst 2950 Desktop Switch Command Reference
snmp-server host
2-237