Hot Desk - iPECS LIP-7024LD User Manual

LIP-7024LD
date, time, and feature status.
speaker of the iPECS Phone and over the handset for SLTs.
For the Station Status Memo, the following items are reported:
ICM Signaling Mode (Handsfree/Tone/Privacy)
Station IP Address
Station Mac Address
Number of messages x (x: number of all message waiting)
Wake-Up Time (hh:mm)
Do Not Disturb
Forwarded to station xxx
Forwarded to speed bin xxx
Queued CO/IP line xxx
Locked (Temporary COS)
COS x
NOTE—only activated features are announced.
OPERATION
To hear Date & Time memo:
• Dial Voice Memo feature code (661 for iPECS-100 or *661 for
iPECS-300 & 600), date and time memo is heard, "Date is May
2nd.Time is xx:xx pm".
To hear Station Number Prompt:
• Dial Voice Memo feature code (662 for iPECS-100 or *662 for
iPECS-300 & 600), the station number memo is heard, "This is
station 150".
To hear Station Settings:
• Dial Voice Memo feature code (663 for iPECS-100 or *663 for
iPECS-300 & 600), Station Status Memo is heard.
9.8

Hot Desk

iPECS phones in the system may be assigned for Hot Desk operation.
These Hot Desk phones let you log-on and use the Hot Desk phone as if
it were your station. Once logged-on, the Hot Desk station will take on
the attributes assigned to your station number and you can make calls as
normal. When logged-out, calls to your station number are forward to
the destination you chose.
To Log on to a Hot Desk station:
• Lift the handset,
Dial "* 0",
•
• Dial your Authorization Code (station number and Password).
Voice Memos are heard over the
４５
User Guide