Installing The Camera To The Mounting Plate - Bosch VEZ Series User Manual

26 en | Installing a Wall Mount
9.
Number
1
2
5.1.3

Installing the Camera to the Mounting Plate

To install the camera to the mounting plate, do the following:
1.
2.
3.
4.
F.01U.139.424 | 2.0 | 2009.08
Attach the mounting plate (supplied with dome) to the
dome mounting cap with the three (3) screws supplied.
Figure 5.4 Attach Mounting Plate to Dome Cap
Description
Cable Hole (40 mm maximum; Crescent Shape
Mounting Screws for Dome Cap
Route wires on side of mounting plate with crescent
shaped cut-out (Ref. #2 Figure 5.4).
Attach grounding wire from unit to the mounting cap (see
Figure 5.6).
Attach user supplied ground to junction box.
Connect the mating connectors with the flying leads to the
user supplied wiring (see (see the AutoDome Easy II User
Manual for wiring information).
User Manual
AutoDome Easy II
Bosch Security Systems, Inc.