Bosch VEZ Series User Manual page 34

28 en | Installing a Wall Mount
8.
9.
10. Secure the safety locking screw with the user supplied
11. Pull excess wire back into the mount tube.
12. Confirm that the housing is electrically grounded.
F.01U.139.424 | 2.0 | 2009.08
Attach the camera to the mounting plate by inserting the
vertical tab into the recessed slot on the top of the camera
dome to the right of the safety locking screw.
Figure 5.7 Attach Safety Locking Screw
Rotate the camera approximately 15 degrees to the right
and lock firmly into place, as shown in the next illustration.
Note: Do not loosen brass mounting buttons.
Figure 5.8 Attach Dome to Mounting Plate
locking torx wrench (T-10).
User Manual
AutoDome Easy II
Bosch Security Systems, Inc.