Bosch VEZ Series User Manual page 115

AutoDome Easy II
Colors are not
correct
Background is too
bright to see subject
Video is rolling,
noisy or distorted
Bosch Security Systems, Inc.
– Reset the White Balance to the appropriate
selection (ON-30-ENTER).
If O.K., then:
– Go to the Camera Setup Menu and increase
the Pre-Compensation setting.
If O.K., then:
– Check that the maximum coax distance has not
been exceeded.
If O.K., then:
– Restore the default settings (ON-40-ENTER).
– Turn on backlight compensation (ON-20-
ENTER).
– Ensure that the Synch Mode is set to Internal
(OFF-42-ENTER).
If O.K., then:
– Check that the maximum coax distance has not
been exceeded.
If O.K., then:
– Check the integrity of all BNC connectors and
splices.
If O.K., then:
– Contact Bosch Technical Support.
User Manual
Troubleshooting | en 109
F.01U.139.424 | 2.0 | 2009.08