44
en | Preparing the Wiring
To connect the power, do the following:
1.
2.
3.
NOTICE! Use certified / Listed Class 2 power supply
transformer only.
8.3
Video and Bilinx Cables
Coaxial Cable/Bilinx
Coaxial cable terminated with BNC connectors is the most
common method for transmitting composite video. Bilinx
control data can also be sent over the same cable.
Bilinx is a Bosch 2-way communication protocol that allows
remote control, configuration, and updates over a video coax
cable. Bilinx is available on all AutoDome Easy II units.
Size
Shield
Central
Conductor
Terminal
Connector
F.01U.139.424 | 2.0 | 2009.08
Locate the cable assembly with a three (3) pin mating
connector on one end and the red and black flying leads on
the other end.
Connect one lead of the ground or 24 VAC power source to
the black wire.
Connect one lead of the 12 V DC or 24 VAC power source
to the red wire.
Recommended Coax Specifications
O.D. between 4.6 mm (0.181 in.) and 7.9 mm
(0.312 in.)
Copper braid: 95%
Standard copper center
BNC
User Manual
AutoDome Easy II
Bosch Security Systems, Inc.