Fastaddress - Bosch VEZ Series User Manual

58 en | Getting Started
10.3.1

FastAddress

FastAddress is an AutoDome Easy II feature that allows the user
to set or change a camera address using the keyboard and on-
screen menus.
There are three (3) FastAddress commands:
–
NOTICE! If a keyboard is set to a camera number that already
has an address, that camera also responds to this command.
–
–
F.01U.139.424 | 2.0 | 2009.08
ON-999-ENTER: Displays and programs all cameras
without an address in the system.
ON-998-ENTER: Displays and programs all cameras with or
without an address in the system.
ON-997-ENTER: Displays the current address status of all
cameras in the system simultaneously.
User Manual
AutoDome Easy II
Bosch Security Systems, Inc.