Standard 25; Restore The Default Value; Allow To Read Standard 25 Or Not; Codeid Setup - Newland NLS-HR15XX-30 User Manual

Nls-hr15 series corded 1d barcode scanner

Table of Contents

【Start Setup】

Set the Minimum Length Limit

Note：the maximum length limit of any 1D barcode must not exceed 255, if the maximum length is shorter than the

minimum length, then the scanner is only able to read the barcodes with the minimum length and the the maximum length;

if the maximum length equals to the minimum length, then the scanner is only able to read the barcode with such length.

Standard 25

By reading the barcode, the parameter setup of Standard 25 will be restored to the factory default state.

Allow to Read Standard 25

Note: the scanner will become unable to read Standard 25 by reading the setup barcode "Prohibit Reading

Standard 25", thus, if the scanner is unable to read the Standard 25, please try to read the setuo barcode "allow to

read Standard 25".

To activate the setup function by reading "CodeID setup", then read the hexadcimal value inaccordance with the character

which will be set to the CodeID.

Example: Set the CodeID ofStandard 25to "p" (the hexadcimal value is 0x70).

Read the "Start Setup" barcode.

【Exit Setup】

Restore the Default Setup Value of Standard 25

Code ID Setup

Set the Maximum Length Limit

Prohibit Reading Standard 25

Table of Contents