Matrix 2 Of 5 (European Matrix 2 Of 5); Restore The Default Value; Restore The Default Setup Value Of Matrix2 Of 5; Codeid Setup - Newland NLS-HR15XX-30 User Manual

Nls-hr15 series corded 1d barcode scanner

Table of Contents

【Start Setup】

Set the Minimum Length Limit

Note：the maximum length limit of any 1D barcode must not exceed 255, if the maximum length is shorter than the

minimum length, then the scanner is only able to read the barcodes with the minimum length and the the maximum length;

if the maximum length equals to the minimum length, then the scanner is only able to read the barcode with such length.

Matrix 2 of 5 (European Matrix 2 of 5)

By reading the barcode, the parameter setup of Matrix2 of 5 will be restored to the factory default state.

Allow to Read Matrix2 of 5

Note: the scanner will become unable to read Matrix2 of 5 by reading the setup barcode "Prohibit Reading Matrix2 of 5",

thus, if the scanner is unable to read the Matrix2 of 5, please try to read the setuo barcode "allow to read Matrix2 of 5".

To activate the setup function by reading "CodeID setup", then read the hexadcimal value inaccordance with the character

which will be set to the CodeID.

【Exit Setup】

99911706

Restore the Default Setup Value of Matrix2 of 5

99911707

Set the Maximum Length Limit

Prohibit Reading Matrix2 of 5

Table of Contents