Itf-14; Codeidsetup - Newland NLS-HR15XX-30 User Manual

Nls-hr15 series corded 1d barcode scanner

Table of Contents

4. Read the "Save" barcode.(see the appendix—numeric barcode)

5. Read the "Exit Setup" barcode.

ITF-14

TIF-14 is a knid of special Interleaved2 of 5 barcode with the barcode length of 14 characters and the last character as the

check character. By default, no special processing is performed on ITF-14, its setup is the same with the normal

Interleaved2 of 5.

ITF-14 priority principle: if the setup of ITF-14 has been changed, then the setup of all the Interleaved2 of 5 barcode with

the barcode length of 14 characters and the last character as the check character should be in accordance with ITF-14.

Restore the Default Setup Value of ITF-14

Prohibit Reading ITF-14

Note: if the setup of ITF-14confilits with the setup of Interleaved2 of 5, for example, reading ITF-14 is allowed, but

reading Interleaved2 of 5 is not; according to the priority principle of ITF-14, the Interleaved2 of 5 with the barcode

length of 14 characters and the last character as the check character can be read, but other Interleaved2 of 5

barcodes can not be read. If the ITF-14 confilits with Deutsch14 the ITF-14 will have priority to read.

To activate the setup function by reading "CodeID setup", then read the hexadcimal value inaccordance with the character

which will be set to the CodeID.

Example: Set the CodeID ofITF-14to "p" (the hexadcimal value is 0x70).

1. Read the "Start Setup" barcode.

2. Read the "CodeID Setup" barcode.

3. Read the numeric barcode "7", "0" (see the appendix—numeric barcode)

4. Read the "Save" barcode.(see the appendix—numeric barcode)

Allow to Read ITF-14, but do not Transmit the Check Digit

Allow to Read ITF-14 and Transmit the Check Digit

CodeID Setup

【Start Setup】

【Exit Setup】

Table of Contents