EAN-13
Restore Default Value
By reading the barcode, the parameter setup of EAN-13 will be restored to the factory default state.
Allow to Read EAN-13 or not
Allow to Read EAN-13
Note:the scanner will become unable to read EAN-13 by reading the setup barcode "Prohibit Reading EAN-13", thus, if the
scanner is unable to read the EAN-13, please try to read the setuo barcode "allow to read EAN-13".
Set Whether or not to Send the Check Digit
The data of EAN-13 barcode is fixed 13 digit, the 13rd bit is the check bit which is used in checking the correctness of alll
the 13 digit.
Send the Check Digit
Code IDSetup
To activate the setup function by reading "CodeID Setup", then read and save the hexadcimal value inaccordance with the
character which will be set to the CodeID.
Example: Set the CodeID of EAN-13 to "p" (the hexadcimal value is 0x70).
Read the "Start Setup" barcode.
1.
Read the "CodeID Setup" barcode.
2.
Read the numeric barcode "7", "0" (see the appendix—numeric barcode)
3.
42
Restore the Default Setup Value of EAN-13
CodeID Setup
【Start Setup】
Prohibit Reading EAN-13
Send the Check Digit
【Exit Setup】