Table of Contents
Advertisement
.. There are four printer-mechanism cables that pass through the grommeted hole in the shield (see
figure
6-6). Disconnect these cables from the logic B PCA, but don't remove them from the
grommeted hole.
.....r. .... Grommeted Hoi. In Logic • Shield
7. Remove the four shield saews (labeled MB' in
figure
6-7). Lift up the shield and disconnect the
display
flex
cable
from
the logic B peA.
A
A
.------------~~~
.-~~
'1 . . . 1·7. Logic • peA Screws and , . . d· Through Connectors.
I. Support the shield up and out of the way by refastening the cable dip
to
the printer-mechanism
cables.
Advertisement
Table of Contents
