Configuring Wips Server Settings - Motorola AP-7131 Product Reference Manual

5-70 AP-7131 Access Point Product Reference Guide
QoS Policy
5. Click Apply
from the screen without clicking Apply results in all changes to the screens being lost.
6. Click Undo Changes
settings displayed on the Bandwidth Management screen to the last saved configuration.
7. Click Logout
logout before the applet is closed.
NOTE Though the Rogue AP and Firewall features appear after the Bandwidth

5.4 Configuring WIPS Server Settings

With this most recent release of the access point firmware, an access point radio can function as a
Wireless Intrusion Protection System (WIPS) sensor and upload sensor mode operation information
to its parent WIPS Server. Either or both of the access point's radios can be set as a WIPS sensor.
When an access point radio is functioning as a WIPS sensor, it is able to scan in sensor mode across
all available channels.
NOTE WIPS support requires a Motorola AirDefense WIPS Server on the
Additionally, use the
information for use within the WIPS console for device management and potential threat notification.
Displays the name of the QoS policy defined for each WLAN within
the Quality of Service for WLAN
set, the WLAN uses the default policy. For information on assigning
QoS policies for specific WLANs, see
Service (QoS) Policy on page
to save any changes to the Bandwidth Management screen. Navigating away
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the Access Point applet. A prompt displays confirming the
Management features within the access point menu tree, they are
described in Chapter 6, Configuring Access Point Security on page
both items are data protection functions. More specifically, see,
Configuring Firewall Settings on page 6-26
Detection on page 6-54.
network. WIPS functionality is not provided by the AP-7131 alone. The
AP-7131 works in conjunction with a dedicated WIPS server.
WIPS screen to define a primary and alternate WIPS server to submit event
screen. If no policy has been
Setting the WLAN Quality of
5-41.
and Configuring Rogue AP
6-1, as