Motorola AP-7131 Product Reference Manual page 505

AP7131>admin(system.access)>set
Description:
Defines the permissions to access the access point applet, CLI, SNMP as well as defining their timeout values.
Syntax:
set applet
app-timeout
cli
ssh
auth-timout
inactive-timeout
snmp
admin-auth
server
port
secret
mode
msg
For information on configuring access point access settings using the applet (GUI), see
Defines the applet HTTP/HTTPS access parameters.
<minutes> Sets the applet timeout. Default is 300 Mins.
Defines CLI Telnet access parameters. Enables/disables access from lan
and wan.
Sets the CLI SSH access parameters.
<seconds> Disables the radio interface if no data activity is detected after the interval
defined. Default is 120 seconds.
<minutes> Inactivity interval resulting in the AP terminating its connection.
Default is 120 minutes.
Sets SNMP access parameters for the AP's LAN and WAN ports.
Designates a Radius server is used in the authentication verification.
<ip> Specifies the IP address the Remote Dial-In User Service (RADIUS) server.
<port#> Specifies the port on which the RADIUS server is listening. Default is 1812.
<pw> Defines the shared secret password for RADIUS server authentication (up
to 31 characters).
<mode> Enables/disables the access point message mode.
Defines the access point login message text (up to 511 characters).
Configuring Data Access on page
8-171
4-11.