Motorola AP-7131 Product Reference Manual page 447

AP7131>admin(network.wireless.radio.802-11n[5.0 GHz])> set
Description:
Defines specific 802.11n (5.0 GHz) radio parameters.
Syntax:
set placement Defines the access point radio placement as indoors or outdoors.
ch-mode Determines how the radio channel is selected.
channel Defines the actual channel used by the radio. Channel allowed depends on actual country of operation.
power Defines the antenna power transmit level. Depends on radio type, channel and country.
rf-mode Sets the default rates for the 802.11 mode selected (a-only, n-only, or a-and-n).
rates Sets the supported radio transmit rates.
beacon Sets the beacon interval used by the radio.
dtim Defines the DTIM interval (by index) used by the radio.
aggr Sets the radio's aggregation.
shortgi Enables/disables a short guard interval of 40MHz.
single-antenna Enables/disables single antenna support. Enable (default setting) to decrease sensitivity and device retries.
rts Defines the RTS Threshold value for the radio.
range Sets the radio's extended range (in miles 0-50).
qos Defines the param-set, cwmin, cwmax, aifsn and txops levels for the QoS policy used for the 5.0 GHz radio.
qbss-beacon Sets the QBSS Channel Util Beacon Interval in kilo-usec (10 - 200).
qbss-mode Enables/disables the QBSS load element.
Example:
admin(network.wireless.radio.802-11n[5.0 GHz])>
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
For information on configuring the Radio 2 Configuration options available to the access point using the applet (GUI), see
Configuring the 802.11a/n or 802.11b/g/n Radio on page
GHz])>set placement indoor
GHz])>set ch-mode auto-40
GHz])>set channel 11
GHz])>set power 4
GHz])>set rates 10
GHz])>set beacon 100
GHz])>set dtim 1 10
GHz])>set aggr ampdu enable
GHz])>set shortgi disable
GHz])>set single-antenna disable
GHz])>set rts 2341
GHz])>set range 40
GHz])>set qbss-beacon 110
GHz])>set qbss-mode enable
5-57.
8-113