Motorola AP-7131 Product Reference Manual page 419

Access point
Hide thumbs Also See for AP-7131:
Table of Contents

Advertisement

ccmp
add-policy
..
CAUTION If importing a 1.1 (or earlier) baseline configuration, the 802.1x EAP Radius shared secret password
!
will remain "symbol," instead of "motorola" (as now required). If the shared secret password is not
changed to "motorola" there will be a shared secret mis-match, resulting in MU authentication
failures. The password cannot be set using the access point Web UI, and must be changed using the
access point CLI.
For information on configuring the encryption and authentication options available to the access point using the applet (GUI), see
Configuring Security Options on page
type
<key type>
key
<256 bit key>
phrase
<ascii phrase>
rotate-mode
<mode>
interval
<time>
type
<key type>
phrase
<ascii phrase>
key
<256 bit key>
mixed-mode
<mode>
preauth
<mode>
6-2.
Sets the TKIP key type.
Sets the TKIP key to <256 bit key>.
Sets the TKIP ASCII pass phrase to <ascii phrase>
(8-63 characters).
Enables or disabled the broadcast key.
Sets the broadcast key rotation interval to <time>
in seconds (300-604800).
Sets the CCMP key type.
Sets the CCMP ASCII pass phrase to <ascii
phrase> (8-63 characters).
Sets the CCMP key to <256 bit key>.
Enables or disables mixed mode (allowing WPA-
TKIP clients).
Enables or disables preauthentication (fast
roaming).
Adds the policy and exits.
Disregards the policy creation and exits the CLI
session.
8-85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents