Motorola AP-7131 Product Reference Manual page 429

AP7131>admin(network.wireless.radio)> set
Description:
Enables an access point Radio and defines the RF band of operation.
Syntax:
set 11a
11bg
mesh-base
mesh-max
mesh-client
mesh-roaming-client
mesh-wlan
dot11-auth
Example:
admin(network.wireless.radio)>set 11a enable
admin(network.wireless.radio)>set 11bg enable
admin(network.wireless.radio)>set mesh-base 1 enable
admin(network.wireless.radio)>set mesh-max 1 11
admin(network.wireless.radio)>set mesh-client 1 disable
admin(network.wireless.radio)>set mesh-roaming-client 1 enable
admin(network.wireless.radio)>set mesh-wlan wlan1
admin(network.wireless.radio)>set dot11-auth shared-key-allowed
admin(network.wireless.radio)>show
Radio Configuration
Radio 1
Name
Radio Mode
Radio Function
RF Band of Operation
Wireless AP Configuration:
Base Bridge Mode
Max Wireless AP Clients
Client Bridge Mode
Clitn Bridge WLAN
Mesh Connection Timeout
Dot11 Auth Algorithm
For information on the options available to the access point, see
<mode> Enables or disables the access point's 5.0 GHz radio.
<mode> Enables or disables the access point's 2.4 GHz radio.
<mode> Enables or disables base bridge mode.
Sets the maximum number of wireless bridge clients.
<mode> Enables or Disables client bridge mode.
<mode> Enables or disables the mesh roaming client mode. For information on the Mesh
Roaming Client feature, see
<name> Defines the client bridge WLAN name.
<auth-algorithm> Defines dot11 level authentication algorithm to either
shared-key-allowed.
Mesh Roaming Client on page
: Radio 1
: enable
: WLAN
: 802.11n(5 GHz)
: enable
: 11
: disable
: WLAN1
: 45 sec.
: shared-key-allowed
Setting the WLAN's Radio Configuration on page
8-95
1-4.
open-system-only ot
5-53.